![](//cdn4.volusion.store/ecnqa-eckzg/v/vspfiles/photos/categories/847.jpg?v-cache=1549014837) |
These custom bent eye bolts were produced together with matching large round u-bolts in A36 material. 3/4-10 thread was incorporated on both parts and 6 eye bolts were produced together with 21 u-bolts, a relatively small production run. Parts were produced within 4 days of order confirmation but could have been done faster with an expedited rush order and fee if necessary. The diameter of the eye was set to 1-1/2" and the thread length was set to 2-1/2". We were approx 1/4" shy of the thread length requested however as going beyond that would encroach onto the bending material. The round u-bolts were made to 3-1/2" between the legs and 4" for the inside length. 1" of 3/4-10 thread was incorporated on each leg.Our relationships with production facilities all over the United States and abroad based on decades of custom hardware & fastener production history, in combination with the flexibility of blanket purchase arrangements, allows us to fully cater to the customer’s hardware specification and procurement requirements.
|
|
|